Dlscrib.com 01 Rezistente Electrice [620186]

REZISTENTE ELECTRICE
INDUSTRIALE
DE INCALZIRE
• Rezistente electrice pentru duze
• Rezistente electrice pentru cilindri
• Rezistente electrice plate
• Rezistente electrice ceramice
• Rezistente electrice turnate in aluminiu
• Izolatii ISOWEMA
• Ventilatoare de racire
INDUSTRIAL
HEATERS
• Nozzle heaters
• Barrel Heaters
• Flat Heaters
• Ceramic heaters
• Cast Aluminium Heaters
• ISOWEMA Insulation covers
• Cooling fans1.PARTEA
PART

DELORTECH – Sisteme de incalziri si raciri industriale – Industrial heating and cooling systems
Aleea Ciocarliei nr. 3/14, 530164 Miercurea Ciuc, HR/RO +40-745-915 912, +40-755-086 086 +40-266-317 243 [anonimizat] www.delortech.roREZISTENTE ELECTRICE INDUSTRIALE DE INCALZIRE
INDUSTRIAL HEATERS
CUPRINS
CONTENT
1.
80,0 mmø100,0 mm-90°
-135°
+20,0 mm
Rezistente electrice pentru duze
Rezistente electrice
pentru duze tip banda
Rezistente electrice
pentru cilindri, cu mica
Rezistente electrice
pentru cilindri, cu mica
Rezistente electrice tip carcasa
Rezistente electrice plate
Rezistente electrice ceramice
Rezistente electrice ceramice plate
Rezistente electrice turnate in aluminiu
Izolatii ISOWEMA®
Combinatii de incalzire-racire
Ventilatoare de racire
Cutii de conectare
Conectoare cablu
Piese de fixare pentru termocuple
Montare – Demontare
Comanda
INFONozzle Heaters
Nozzle Band Heaters
Mica Barrel Heaters
Mica Barrel Heaters
Frame Heaters
Flat Heaters
Ceramic Heaters
Ceramic-Surface Heaters
Cast Aluminium Heaters
ISOWEMA® Insulation covers
Heating and cooling combinations
Cooling fans
Terminal boxes
Cable connectors
Thermocouple – Holder
Installation – Removal
Ordering
INFO1.01
1.02
1.03
1.04
1.05
1.06
1.07
1.08
1.09
1.10
1.11
1.12
1.13
1.14
1.15
1.16
1.19
1.20
1.21
1.22
1.23

DELORTECH – Sisteme de incalziri si raciri industriale – Industrial heating and cooling systems
Aleea Ciocarliei nr. 3/14, 530164 Miercurea Ciuc, HR/RO +40-745-915 912, +40-755-086 086 +40-266-317 243 [anonimizat] www.delortech.ro
1.REZISTENTE ELECTRICE INDUSTRIALE DE INCALZIRE
INDUSTRIAL HEATERS
1.01
Tip/Type DH200, DH200H, DH400, DH400 HRezistente electrice pentru duze Nozzle Heaters
Application:
• Heating of nozzles on injection moulding machines and
similar applications.
Construction:
• Resistance wire in special micanite insulation,
completely enclosed in a seamless brass tube, or
stainless steel tube to prevent plastic ingress.
Models:
• Sturdy steel connection cover Cable length: 300 mm
(standard), other lengths on request. Different cable
entry/angles (see sketches) are available.
Standard cable entry: Type 1 – 45° degrees.
• Available also with holes or built-in thermocouples.
* Separate brass-ring-thermocouples (Art-Nr. TF 2105)
available.Aplicatii:
• Incalzirea duzelor pe masinile de injectie si aplicatii
similare.
Constructie:
• Sarma rezistenta in izolatie speciala de mica complet
incastrat intr-un tub de alama fara sudura, sau in tub
din otel inoxidabil pentru a impiedica patrunderea
plasticului.
Modele:
• Conexiune robusta cu acoperire cu otel, lungime
cablu: 300mm (standard), alte lungimi la cerere. Sunt
disponibile diferite tipuri de intrare si unghi a cablurilor (a
se vedea schitele).
Intrarea cablului standart: Tipul 1 – la 45° de grade
• Disponibile deasemenea cu gauri sau cu termocuple
incorporate.
* Este disponibil separat si termocuplu de alama tip inel
(Nr.-Art. TF 2105).
Nr. / No. DH200 DH200H DH400 DH400H

Alimentarea: la cerere
Main supply: as required
max T: 300
max T: °C
ø min:
ø min: mm 25,0
ø max:
ø max: mm 110,0
Latime min.: 20,0
Width min.: mm
Latime max.: 80,0 50,0
Width max.: mm
Densitatea de putere:
Heating – power: W/cm2 max.: 3,5 max.: 6,0 max.: 3,5 max.: 6,0
*TF 2105

1.REZISTENTE ELECTRICE INDUSTRIALE DE INCALZIRE
INDUSTRIAL HEATERS
1.02
DELORTECH – Sisteme de incalziri si raciri industriale – Industrial heating and cooling systems
Aleea Ciocarliei nr. 3/14, 530164 Miercurea Ciuc, HR/RO +40-745-915 912, +40-755-086 086 +40-266-317 243 info@delortech.ro www.delortech.ro
=45°
=15° 28 20 80 100
28 25 80 100
30 20 80 100
30 25 90 120
30 30 100 160
35 20 100 120
35 25 100 150
35 30 120 180
35 40 150 240
40 20 120 160
40 25 130 180
40 30 140 250
40 40 180 300
40 50 220 350
45 20 130 180
45 25 140 200
45 30 150 250
45 40 190 320
45 50 220 350
48 20 140 180
48 25 150 200
48 30 160 270
48 40 200 320
48 50 250 420
50 20 140 180
50 25 150 210
50 30 160 270
50 40 200 350
50 50 260 430
55 20 160 200
55 25 150 210
55 30 180 320
55 40 250 400
55 50 300 480
58 20 160 200
58 25 170 250
58 30 180 320
58 40 250 400
60 20 160 210
60 25 170 260
60 30 180 350
60 40 250 450
60 50 340 520
65 20 180 270
65 25 190 300
65 30 230 370
65 40 280 450
70 30 250 400
70 35 300 420
70 40 350 500
70 50 400 600
70 60 * 450 720
75 30 250 450
75 40 350 550
80 20 180 320
80 30 150 450
80 40 350 550
80 60 * 500 820
85 30 300 500
85 40 350 600
85 60 * 500 900
90 30 300 500
90 40 350 600
90 60 * 500 900
100 30 340 550
100 40 450 700
100 50 480 800
100 60 * 560 900
110 30 340 550
110 40 450 700
110 50 480 800
110 60 * 560 900Rezistente electrice pentru duze Nozzle Heaters
DH200 DH400
DH400 DH400H
D (ø-mm) B (mm) P (Watt) P (Watt)
Other dimensions
and heating-power on request.
*: DH400 only available up to 50 mm widthsAlte dimensiuni
si puteri la cerere.
*: DH400 diponibil numai pana la latimea de 50 mmTip/Type 5
tangential 45°Tip/Type 4
tangential 0°Tip/Type 3
radialTip/Type 2
axial 0°Tip/Type 1
axial:

DELORTECH – Sisteme de incalziri si raciri industriale – Industrial heating and cooling systems
Aleea Ciocarliei nr. 3/14, 530164 Miercurea Ciuc, HR/RO +40-745-915 912, +40-755-086 086 +40-266-317 243 info@delortech.ro www.delortech.ro
1.REZISTENTE ELECTRICE INDUSTRIALE DE INCALZIRE
INDUSTRIAL HEATERS
1.03
Tip/Type KH200, KH200HRezistente electrice
pentru duze, tip bandaNozzle
Band Heaters
Application:
Heating of nozzles and moulds, especially in cases where
only limited space is available for mounting.
For example: runners with manifolds.
Construction:
Resistance wire in special micanite insulation, encased in
a brass tube. Not completely sealed.
Models:
Connection by means of two glass fibre insulated leads.
Cable length: 300 mm (standard), other lengths on
request.
• Radial cable entry (Type 1), or axial cable entry ( Type 2).
• Also available with holes.
Standard measurements are indicated in the table
alongside.Aplicatii:
Incalzirea duzelor si matritelor, mai ales in cazurile in care
sunt disponibile pentru montare in spatii limitate.
De exemplu: la blocurile canalelor calde.
Constructie:
Sarma rezistenta in izolatie speciala de mica, incastrat intr-
un tub de alama. Nu este complet sigilat.
Modele:
Conectarea prin intermediul a doua conductoare,
cu izolatie cu fibra de sticla. Lungime cablu: 300mm
(standard), alte lungimi la cerere.
• Cablu de intrare tip radial ( Tip1 ) sau tip axial ( Tip2 ).
• Deasemenea disponibile cu gauri.
Dimensiunile standard sunt indicate in tabelul
alaturat.
Nr. / No. KH200 KH200H

Alimentarea: la cerere
Main supply: as required
max T: 300
max T: °C
ø min:
ø min: mm 25,0
ø max:
ø max: mm 100,0
Latime min.: 20,0
Width min.: mm
Latime max.: 80,0
Width max.: mm
Densitatea de putere:
Heating – power: W/cm2 max.: 3,5 max.: 7,0

1.REZISTENTE ELECTRICE INDUSTRIALE DE INCALZIRE
INDUSTRIAL HEATERS
1.04
DELORTECH – Sisteme de incalziri si raciri industriale – Industrial heating and cooling systems
Aleea Ciocarliei nr. 3/14, 530164 Miercurea Ciuc, HR/RO +40-745-915 912, +40-755-086 086 +40-266-317 243 info@delortech.ro www.delortech.ro
D (ø-mm) B (mm) P (Watt) P (Watt)
25 20 60 110
25 30 80 160
25 40 110 220
25 60 160 320
25 80 220 440
28 20 60 120
28 30 90 180
28 40 120 240
28 60 180 360
28 80 250 480
30 20 80 120
30 30 100 150
30 40 150 300
30 60 200 400
30 80 260 520
35 20 100 150
35 30 120 230
35 40 150 300
35 60 220 450
35 80 300 600
40 20 120 200
40 30 140 260
40 40 180 350
40 60 260 520
40 80 350 650
60 40 250 500
60 60 400 800
60 80 520 1000
80 40 350 650
80 60 500 950
80 80 700 1200
Rezistente electrice
pentru duze, tip bandaNozzle
Band Heaters
Other dimensions
and heating-power on request.M 5×20
Tip/Type 1 radial12
4
Alte dimensiuni
si puteri la cerere.
D
B
B
Tip/Type 2 axial

DELORTECH – Sisteme de incalziri si raciri industriale – Industrial heating and cooling systems
Aleea Ciocarliei nr. 3/14, 530164 Miercurea Ciuc, HR/RO +40-745-915 912, +40-755-086 086 +40-266-317 243 info@delortech.ro www.delortech.ro
1.REZISTENTE ELECTRICE INDUSTRIALE DE INCALZIRE
INDUSTRIAL HEATERS
1.05
Tip/Type ZH205Rezistente electrice
pentru cilindri, cu micaMica
Barrel Heaters
Application:
Heating of tools, moulds and cylinders on plastic pro-
cessing machines and similar applications.
Construction:
Resistance wire in special mica insulation, encased in
nickel alloy sheet steel with clamping band made from
aluminium-alloy sheet steel and roller bolt fastening.
Models:
Bore holes, thermocouple bridges and cut-outs are
available provided that the measurements permit.
• Power connection via plug socket, terminal box or
securely mounted cable.
• Also available with brass heat conductor plates.
Important:
Please note the remarks concering assembly, which
are given on page 1.22.Aplicatii:
Incalzirea utilajelor, matritelor si cilindrilor pe masinile de
prelucrare a maselor plastice si aplicatii similare.
Constructie:
Sarma rezistenta in izolatie speciala de mica, incastrat in
tabla de aliaj de nichelina si otel, cu banda de prindere din
aliaj de aluminiu si otel, cu fixare cu role si suruburi.
Modele:
Sunt disponibile cu gauri, cu piese de fixare pentru
termocuple si cu decupari cu conditia ca dimensiunile sa
permita.
• Conectarea alimentarii cu prize, cutie de borne sau
cabluri montate.
• Deasemenea disponibile cu placi de alama conductoare
de caldura.
Important:
Va rugam sa retineti observatiile referitoare la
asamblare, care sunt prezentate pe pagina 1.22.
Nr. / No. ZH205

Alimentarea: la cerere
Main supply: as required
max T: 350
max T: °C
ø min:
ø min: mm 55,0
Latime min.: 20,0
Width min.: mm
Latime max.: 400,0
Width max.: mm
Grosimea rezistentei: ~ 4,0
Thickness of heater: mm
Densitatea de putere:
Heating – power: W/cm2 max.: 3,5

1.REZISTENTE ELECTRICE INDUSTRIALE DE INCALZIRE
INDUSTRIAL HEATERS
1.06
DELORTECH – Sisteme de incalziri si raciri industriale – Industrial heating and cooling systems
Aleea Ciocarliei nr. 3/14, 530164 Miercurea Ciuc, HR/RO +40-745-915 912, +40-755-086 086 +40-266-317 243 info@delortech.ro www.delortech.ro
Tip/Type ZH206Rezistente electrice
pentru cilindri, cu micaMica
Barrel Heaters
Mica Barrel Heater
with heat reflecting outer cover
Application:
Heating of cylinders on plastic processing machines and
similar applications.
Construction:
Resistance wire in special micanite insulation, encased in
nickel alloy sheet steel, with aluminium alloy sheet steel
clamping band.
Models:
Additionally reflector cover with hinged joint and roller bolt
fastening.
Bore holes, thermocouple bridges and cut-outs available
provided that the measurements permit.
• Power connection via plug socket or terminal box or
securely mounted cable.
• Available also with brass heat conductor plates.
Important:
Please note the remarks concering assembly, which
are given on page 1.22.Rezistenta electrica pentru cilindru cu mica,
cu carcasa de reflectie a caldurii
Aplicatii:
Incalzirea cilindrilor pe masinile de prelucrare a maselor
plastice si aplicatii similare.
Constructie:
Sarma rezistenta in izolatie speciala de mica, incastrat in
tabla de aliaj de nichelina si otel, cu banda de prindere din
aliaj de aluminiu si otel.
Modele:
Aditional, carcasa reflectie cu balamale, cu role si suruburi
de fixare.
Sunt disponibile cu gauri, cu piese de fixare pentru
termocuple si cu decupari cu conditia ca dimensiunile sa
permita.
• Conectarea alimentarii cu prize, cutie de borne sau
cabluri montate.
• Deasemenea disponibile cu placi de alama conductoare
de caldura.
Important:
Va rugam sa retineti observatiile referitoare la
asamblare, care sunt prezentate pe pagina 1.22.
Nr. / No. ZH206

Alimentarea: la cerere
Main supply: as required
max T: 350
max T: °C
ø min:
ø min: mm 60,0
Latime min.: 50,0
Width min.: mm
Latime max.: 400,0
Width max.: mm
Grosimea rezistentei: ~ 19,0
Thickness of heater: mm
Densitatea de putere:
Heating – power: W/cm2 max.: 3,5

DELORTECH – Sisteme de incalziri si raciri industriale – Industrial heating and cooling systems
Aleea Ciocarliei nr. 3/14, 530164 Miercurea Ciuc, HR/RO +40-745-915 912, +40-755-086 086 +40-266-317 243 info@delortech.ro www.delortech.ro
1.REZISTENTE ELECTRICE INDUSTRIALE DE INCALZIRE
INDUSTRIAL HEATERS
1.07
Tip/Type RK220, RK210Rezistente electrice tip carcasa Frame Heaters
Application:
Heating of tools and moulds in the plastic processing indu –
stry and similar applicatons.
Construction:
Resistance wire in special micanite insulation, encased in
nickel alloy steel sheet with 8,0 mm thick clamping plate,
laquered, with edge protection and 2,0 mm thick insulation
clamped by means of M8 screws and nuts.
Models:
Standard Widths:
20,25,30,35,40,45,50,60,70,75,80,90,100 mm etc.
Available with holes, thermocouple bridges and cut outs
provided that the measurements permit.
• Power connection via plug socket, terminal box or secu –
rely mounted cable.
• Available also with brass heat conductor plates.

(For special applications requiring higher temperatures,
available in ceramic insulation as type RK 210)
Important:
Please note the remarks concering assembly, which
are given on page 1.22.Aplicatii:
Incalzirea utilajelor si matritelor in industria prelucrarii ma –
selor plastice si aplicatii similare.
Constructie:
Sarma rezistenta in izolatie speciala de nica, incastrat in
tabla de aliaj de nichelina si otel cu placa de strangere cu
grosimea de 8,0 mm, lacuit, cu margine de protectie si
izolatie cu grosimea de 2,0 mm fixata prin intermediul su –
ruburilor M8 si a piulitelor.
Modele:
Latimi standard:
20,25,30,35,40,45,50,60,70,75,80,90,100 mm etc.
Sunt disponibile cu gauri, cu piese de fixare pentru
termocuple si cu decupari cu conditia ca dimensiunile sa
permita.
• Conectarea alimentarii cu prize, cutie de borne sau
cabluri montate.
• Deasemenea disponibile cu placi de alama conductoare
de caldura.
(Pentru aplicatii speciale care necesita temperaturi mai
ridicate, sunt disponibile cu izolatii ceramice tip RK 210)
Important:
Va rugam sa retineti observatiile referitoare la
asamblare, care sunt prezentate pe pagina 1.22.
Nr. / No. RK220 RK210

Alimentarea: la cerere
Main supply: as required
max T: 350 420
max T: °C
Grosimea rezistentei: ~ 19,0
Thickness of heater: mm
Densitatea de putere:
Heating – power: W/cm2 max.: 3,5 max.: 7,0A
B
H148
18

1.REZISTENTE ELECTRICE INDUSTRIALE DE INCALZIRE
INDUSTRIAL HEATERS
1.08
DELORTECH – Sisteme de incalziri si raciri industriale – Industrial heating and cooling systems
Aleea Ciocarliei nr. 3/14, 530164 Miercurea Ciuc, HR/RO +40-745-915 912, +40-755-086 086 +40-266-317 243 info@delortech.ro www.delortech.ro
Alimentarea: la cerere
Main supply: as required
max T: 350
max T: °C
Densitatea de putere:
Heating – power: W/cm2 max.: 3,5Tip/Type BK225Rezistente electrice plate Flat Heaters
Application:
Heating of tools and moulds in the plastic processing indu –
stry and similar applications.
Construction:
Resistance wire in special micanite insulation, encased in
nickel alloy steel sheet, optionally with contact pressure
plate 5mm thick.
Models:
For fastening the heater, matching holes can be provided.
Available with bore holes, thermocouple bridges and cut-
outs provided that the measurements permit.
• Power connection via plug socket or terminal box or by a
securely mounted cable.
• Available also with brass heat conducting plate.
Important:
Please note the remarks concering assembly, which
are given on page 1.22.Aplicatii:
Incalzirea utilajelor si matritelor in industria prelucrarii ma –
selor plastice si aplicatii similare.
Constructie:
Sarma rezistenta in izolatie speciala de nica, incastrat in
tabla de aliaj de nichelina si otel cu placa contact de presi –
une cu grosimea de 5 mm.
Modele:
Pentru fixarea rezistentei, pot fi realizate gauri la cerere.
Sunt disponibile cu gauri, cu piese de fixare pentru
termocuple si cu decupari cu conditia ca dimensiunile sa
permita.
• Conectarea alimentarii cu prize, cutie de borne sau
cabluri montate.
• Deasemenea disponibile cu placi de alama conductoare
de caldura.
Important:
Va rugam sa retineti observatiile referitoare la
asamblare, care sunt prezentate pe pagina 1.22.
Nr. / No. BK225
3,02,05,0Placa de contact
Contact plate
Rezistenta / Heater
Placa alama
Brass plate

DELORTECH – Sisteme de incalziri si raciri industriale – Industrial heating and cooling systems
Aleea Ciocarliei nr. 3/14, 530164 Miercurea Ciuc, HR/RO +40-745-915 912, +40-755-086 086 +40-266-317 243 info@delortech.ro www.delortech.ro
1.REZISTENTE ELECTRICE INDUSTRIALE DE INCALZIRE
INDUSTRIAL HEATERS
1.09
Tip/Type KH210Rezistente electrice ceramice Ceramic Heaters
Application:
Heating of moulds and cylinders on plastic processing
machines and similar applications.
Construction:
Resistance wire mounted in special ceramic compo-
nents, which are resistant to high temperature with
clamping band from aluminium alloy steel sheet and
including insulating liner and roller bolt fastening
(if required with tensioning springs).
Models:
Half bands or segments available. Available with bore
holes, thermocouple bridges and cut-outs provided that
the measurements permit.
• Power connection via plug socket, terminal box or
securely mounted cable.
Width:
Due to the measurements of the ceramic components
heaters are only available with the following widths: 21, 36,
51, 66, 81, 96, 111, 126, 141, 156, 171, 186, 201, 216 and
then increasing only by 15 mm increments.
Important:
Please note the remarks concering assembly, which
are given on page 1.22.Aplicatii:
Incalzirea matritelor si cilindrilor pe masinile de prelucrare
a maselor plastice si aplicatii similare.
Constructie:
Sarma rezistenta montata in componente speciale
ceramice care sunt rezistente la temperaturi ridicate, cu
banda de prindere din aliaj de aluminiu si otel, inclusiv
cu role si suruburi de prindere (La cerere cu arcuri de
tensionare).
Modele:
Sunt disponibile jumatati de benzi sau segmente. Sunt
disponibile cu gauri, cu piese de fixare pentru termocuple
si cu decupari cu conditia ca dimensiunile sa permita.
• Conectarea alimentarii cu prize, cutie de borne sau
cabluri montate.
Latime:
Datorita dimensiunilor componentelor ceramice,
rezistentele sunt disponibile numai cu urmatoarele latimi:
21, 36, 51, 66, 81, 96, 111, 126, 141, 156, 171, 186, 201,
216 mm, si apoi crescand cu trepte de 15,0 mm.
Important:
Va rugam sa retineti observatiile referitoare la
asamblare, care sunt prezentate pe pagina 1.22.
Nr. / No. KH210

Alimentarea: la cerere
Main supply: as required
max T: 420
max T: °C
ø min:
ø min: mm 60,0
Latime min.: 21,0
Width min.: mm
Grosimea rezistentei: ~ 12,0
Thickness of heater: mm
Densitatea de putere:
Heating – power: W/cm2 max.: 7,0

1.REZISTENTE ELECTRICE INDUSTRIALE DE INCALZIRE
INDUSTRIAL HEATERS
1.10
DELORTECH – Sisteme de incalziri si raciri industriale – Industrial heating and cooling systems
Aleea Ciocarliei nr. 3/14, 530164 Miercurea Ciuc, HR/RO +40-745-915 912, +40-755-086 086 +40-266-317 243 info@delortech.ro www.delortech.ro
Tip/Type BK210Rezistente electrice ceramice plate Ceramic-Surface Heaters
Application:
Heating of moulds and cylinders on plastic processing
machines and similar.
Construction:
Spirally wound resistance wire mounted in special ceramic
components (see picture), which are resistant to high
temperatures, optionally with contact pressure plate.
Models:
For fastening the heater, matching holes can be provided.
Available with bore holes, thermocouple bridges and cut-
outs provided that the measurements permit.
• Power connection via plug socket, terminal box or
securely mounted cable.
Important:
Please note the remarks concering assembly, which
are given on page 1.22.
Rezistenta fara placa contact de presiune
Heater without contact pressure plateAplicatii:
Incalzirea matritelor si cilindrilor pe masinile de prelucrare
a maselor plastice si aplicatii similare.
Constructie:
Sarma rezistenta elicoidala montata in componente
speciale ceramice (vedeti imaginea) care sunt rezistente la
temperaturi ridicate, optional cu placa contact de presiune.
Modele:
Pentru fixarea rezistentei, pot fi realizate gauri la cerere.
Sunt disponibile cu gauri, cu piese de fixare pentru
termocuple si cu decupari cu conditia ca dimensiunile sa
permita.
• Conectarea alimentarii cu prize, cutie de borne sau
cabluri montate.
Important:
Va rugam sa retineti observatiile referitoare la
asamblare, care sunt prezentate pe pagina 1.22.
Nr. / No. BK210

Alimentarea: la cerere
Main supply: as required
max T: 420
max T: °C
Grosimea rezistentei: 9,0
Thickness of heater: mm (fara placa contact de presiune / without contact pressure plate)
Grosimea rezistentei: 12,0
Thickness of heater: mm (cu placa contact de presiune / with contact pressure plate)
Densitatea de putere:
Heating – power: W/cm2 max.: 7,0

DELORTECH – Sisteme de incalziri si raciri industriale – Industrial heating and cooling systems
Aleea Ciocarliei nr. 3/14, 530164 Miercurea Ciuc, HR/RO +40-745-915 912, +40-755-086 086 +40-266-317 243 info@delortech.ro www.delortech.ro
1.REZISTENTE ELECTRICE INDUSTRIALE DE INCALZIRE
INDUSTRIAL HEATERS
1.11
Tip/Type AH230Rezistente electrice turnate in aluminiu Cast aluminium heaters
Application:
Heating of tools and moulds in the plastic processing
industry or similar.
Construction:
Tubular heater built in aluminium, corresponding to
the required design, with a machined surface. Fixation
available with bore-holes, or (for cylindrical designs) with
metal strap bands.
Cast aluminium heaters are strong and robust. They are
particulary suitable in conditions where moisture and
condensation prevails.
Also available with cooling fans for air-cooling on
extrusion-cylinders, or with cooling pipes for water- or oil
cooling.
• Power connection via plug socket, terminal box or
securely mounted cable.
Important:
Please note the remarks concering assembly, which
are given on page 1.22.Aplicatii:
Incalzirea matritelor si cilindrilor pe masinile de prelucrare
a maselor plastice si aplicatii similare.
Constructie:
Rezistente tubulare incorporate in aluminiu, care
corespund cererii de proiectare, cu suprafete prelucrate.
Fixari disponibile cu gauri sau (pentru constructii cilindrice)
cu benzi metalice.
Rezistentele electrice turnate in aluminiu sunt puternice si
robuste. Acestea sunt deosebit de adecvate in conditiile in
care predomina umiditatea si condensul.
De asemenea disponibile cu aripioarele de racire pentru
aer pe cilindrii extruderilor, sau cu tevi de racire pentru apa
sau ulei.
• Conectarea alimentarii cu prize, cutie de borne sau
cabluri montate.
Important:
Va rugam sa retineti observatiile referitoare la
asamblare, care sunt prezentate pe pagina 1.22.
Nr. / No. AH230

Alimentarea: la cerere
Main supply: as required
max T: 300
max T: °C
Densitatea de putere:
Heating – power: W/cm2 max.: 6,0

1.REZISTENTE ELECTRICE INDUSTRIALE DE INCALZIRE
INDUSTRIAL HEATERS
1.12
DELORTECH – Sisteme de incalziri si raciri industriale – Industrial heating and cooling systems
Aleea Ciocarliei nr. 3/14, 530164 Miercurea Ciuc, HR/RO +40-745-915 912, +40-755-086 086 +40-266-317 243 info@delortech.ro www.delortech.ro
Izolatii ISOWEMA®ISOWEMA® Insulation covers
Insulation covers for heated zones of injection moulding
machines
Description:
Regardless of type of machine, ISOWEMA® insulation
covers can be individually produced for each heater
band. The electrical connection and sensors can be
accomodated. It is constructed of several layers of
insulation material, (Thickness: 15 – 25 mm) with high
temperature stability, resulting in the surface temperature
and the loss of energy being reduced.
Construction:
Mechanically consolidated glass fibre fleece is sewn in
an abrasion proofed glass fabric. Both materials have a
permanent temperature stability up to 500 oC. The outer
surface of the insulation consists of a highly abrasion
proofed material which resists both dirt and plastic
material.
Advantages:
• reduction in energy consumption of the machine hea-
ters by 20 – 40%.
• extended life of the heaters because of reduction in heat
load.
• increased workforce protection by reducing of the sur-
face contact temperature by 60 – 70%.
• can always be retro-fitted – rapid assembly and disas-
sembly.
• long life of the insulation cover because abrasion proo-
fed materials with high temperature stability are used.
• physiologically harmless insulation materials.
• the amortisation time of ISOWEMA® is less than one
year.Manson de izolatii pentru zonele incalzite a masinilor de
injectie
Descriere:
Indiferent de tipul de masina, mansonul de izolatie
ISOWEMA® poate fi produs individual pentru fiecare
banda de incalzire. Conectarea electrica si senzorii pot
fi cazati. Aceasta este construita din mai multe straturi
de materiale izolatoare (grosimi: 15 – 25 mm) cu un
grad ridicat de stabilitate a temperaturii, rezultand in
temperatura de suprafata si pierderile de energie fiind
reduse.
Constructie:
Fibra de lana, consolidat mecanic cu fibra de sticla este
cusuta intr-o tesatura de sticla cu abraziune impermeabila.
Ambele materiale au o stabilitate permanenta de
temperatura de pana la 500 oC. Suprafata exterioara
a izolatiei consta dintr-un material cu o abraziune
impermeabila ridicata, care rezista impotriva impuritatilor si
materialului plastic.
Avantajele:
• reducerea consumului de energie a rezistentelor
masinilor cu pana la 20 – 40%.
• durata de viata extinsa a rezistentelor datorita reducerii
sarcinii termice.
• protectie ridicata a sigurantei prin reducerea temperaturii
suprafetei de contact cu pana la 60 – 70%.
• pot fi intotdeaunea montate si demontate rapid.
• durata de viata lunga a mansonului de izolare deoarece
sunt utilizate materiale cu abraziune impermeabila, cu
stabilitate ridicata la temperaturi
• materialele izolatiei sunt inofensive fiziologic
• timpul de amortizare a izolatiei ISOWEMA® este mai
putin de un an.
Nr. / No. ISOWEMA®

Dimensiuni: la cerere
Dimensions: as required
max T: 500
max T: °C
Grosimea materialului: 15 – 25
Thickness of material: mm

DELORTECH – Sisteme de incalziri si raciri industriale – Industrial heating and cooling systems
Aleea Ciocarliei nr. 3/14, 530164 Miercurea Ciuc, HR/RO +40-745-915 912, +40-755-086 086 +40-266-317 243 info@delortech.ro www.delortech.ro
1.REZISTENTE ELECTRICE INDUSTRIALE DE INCALZIRE
INDUSTRIAL HEATERS
1.13
Aplicatii:
Incalzirea si racirea cilindrilor pe extrudere.
Constructie:
Carcasa exterioara realizata din tabla de aliaj de
aluminiu si otel inoxidabil cu capac detasabil pentru o
asamblare simpla. Flansa de montare pentru ventilator
de racire (vedeti pagina 1.14 si 1.15). Constructie
speciala a canalelor interne de distributie a aerului si a
gaurilor de evacuare. Cutie de borne spatioase pentru
conectari electrice. Sunt disponibile cu gauri, cu piese
de fixare pentru termocuple si cu decupari cu conditia ca
dimensiunile sa permita.
Tipuri:
HK211: cu rezistente de incalzire
din ceramica ( KH210 ) sau mica ( ZH205 ).
HK212: cu rezistente de incalzire
din ceramica ( KH210 ) sau mica ( ZH205 ).
O suprafata de racire mai mare poate fi
obtinut prin aripioare de racire speciale de
cupru cu latimi de 60 si 90 mm.
HK214: cu rezistente – benzi (latimi: 63 sau 48 mm)
produse din conductoare ceramice speciale
cu aripioare de racire integrate pe partea
din spate pentru o racire intensiva cu aer.
Potrivit pentru temperaturi de productie
ridicata.
Alimentarea: la cerere
Main supply: as required
max T: Mica/Mica: 350
max T: °C Ceramic/Ceramic: 420
Aluminiu / Aluminium: 300
Ceramica speciala / Special ceramic: 600
ø min:
ø min: mm 70,0
Latime min.: 100,0
Width min.: mm
Densitatea de putere:
Heating – power: W/cm2 max.: 7,0Tip/Type HK211 / HK212 / HK214Combinatii de incalzire-racire Heating and cooling combinations
Application:
Heating and cooling of cylinders on extruders.
Construction:
Outer casting made from aluminium alloy steel sheet or
stainless steel sheet, with detachable cover for simple
assembly. Mounting flange for cooling fan (see page 1.14
and 1.15). Specially designed internal air distribution
channels and exhaust vents. Spacious terminal box
for electrical connection. Available with bore holes,
thermocouple bridges and cut outs provided that the
measurements permit.
Types:
HK211: with ceramic heater bands ( KH210 ) or mica
heater bands ( ZH205 ).
HK212: with ceramic heater bands ( KH210 ) or mica
heater bands ( ZH205 ). A larger cooling
surface can be obtained by special copper
cooling fins of 60 and 90 mm width.
HK214: with heater – bands (widths: 63 or 48 mm)
made of high conductive special ceramic
with integrated cooling fans on the backside
for intensive air cooling. Suitable for high
production temperature.
HK211 HK212 HK214
Nr. / No. HK211 / HK212 / HK214

1.REZISTENTE ELECTRICE INDUSTRIALE DE INCALZIRE
INDUSTRIAL HEATERS
1.14
DELORTECH – Sisteme de incalziri si raciri industriale – Industrial heating and cooling systems
Aleea Ciocarliei nr. 3/14, 530164 Miercurea Ciuc, HR/RO +40-745-915 912, +40-755-086 086 +40-266-317 243 info@delortech.ro www.delortech.ro
Ventilatoare de racire Cooling fans
Single-phase-AC-motor or three-phase-motor.
Protective grade: IP44
Single-phase-AC-motor or three-phase-motor.
Protective grade: IP44Cu motor monofazic sau trifazic, de curent alternativ.
Grad de protectie: IP44
Cu motor monofazic sau trifazic, de curent alternativ.
Grad de protectie: IP44Nr. / No. ENG 2-2,5 DNG 2-2,5 WS

Nr. / No. ENG 3-6 DNG 3-6
Debit aer: max. 190
Performance of air: m3/h
Presiune Pfa: max. 230
Pressure Pfa: Pa
Putere: 30 45
Power: W
Tensiune: 230 230/400
Voltage: V
Curent: 0,25 0,19/0,11
Current: A
Viteza: 2760 2750
Speed: min -1
Frecventa: 50
Frequency: Hz
Nivel de zgomot: 62
Noise level: dB (A)
Greutate: ~2,8
Weight: kg
Debit aer: max. 430
Performance of air: m3/h
Presiune Pfa: max. 340
Pressure Pfa: Pa
Putere: 90
Power: W
Tensiune: 230 230/400
Voltage: V
Curent: 0,76 0,52/0,30
Current: A
Viteza: 2770 2760
Speed: min -1
Frecventa: 50
Frequency: Hz
Nivel de zgomot: 65
Noise level: dB (A)
Greutate: ~4,0
Weight: kg
The above shown cooling fans are examples.
Other types on request.Ventilatoarele de racire de mai sus sunt exemple.
Alte tipuri la cerere.

DELORTECH – Sisteme de incalziri si raciri industriale – Industrial heating and cooling systems
Aleea Ciocarliei nr. 3/14, 530164 Miercurea Ciuc, HR/RO +40-745-915 912, +40-755-086 086 +40-266-317 243 info@delortech.ro www.delortech.ro
1.REZISTENTE ELECTRICE INDUSTRIALE DE INCALZIRE
INDUSTRIAL HEATERS
1.15
Ventilatoare de racire Cooling fans
Single-phase-AC-motor or three-phase-motor.
Protective grade: IP54
Single-phase-AC-motor or three-phase-motor.
Protective grade: IP54Cu motor monofazic sau trifazic, de curent alternativ.
Grad de protectie: IP54
Cu motor monofazic sau trifazic, de curent alternativ.
Grad de protectie: IP54Nr. / No. ENG 3-12D DNG 3-12D

Nr. / No. DNG 5-38D

Debit aer: max. 1060
Performance of air: m3/h
Presiune Pfa: max. 415
Pressure Pfa: Pa
Putere: 250
Power: W
Tensiune: 230 230/400
Voltage: V
Curent: 1,8 1,1/0,65
Current: A
Viteza: 2850 2800
Speed: min -1
Frecventa: 50
Frequency: Hz
Nivel de zgomot: 70
Noise level: dB (A)
Greutate: ~7,6
Weight: kg
Debit aer: max. 1850
Performance of air: m3/h
Presiune Pfa: max. 680
Pressure Pfa: Pa
Putere: 550
Power: W
Tensiune: 230/400
Voltage: V
Curent: 2,15/1,24
Current: A
Viteza: 2810
Speed: min -1
Frecventa: 50
Frequency: Hz
Nivel de zgomot: 76
Noise level: dB (A)
Greutate: ~14,4
Weight: kg
The above shown cooling fans are examples.
Other types on request.Ventilatoarele de racire de mai sus sunt exemple.
Alte tipuri la cerere.

1.REZISTENTE ELECTRICE INDUSTRIALE DE INCALZIRE
INDUSTRIAL HEATERS
1.16
DELORTECH – Sisteme de incalziri si raciri industriale – Industrial heating and cooling systems
Aleea Ciocarliei nr. 3/14, 530164 Miercurea Ciuc, HR/RO +40-745-915 912, +40-755-086 086 +40-266-317 243 info@delortech.ro www.delortech.ro
Cutii de conectare, Tip CEE Plug sockets, CEE-Type
Tip/Type KO30CEE/1
pentru conectare tangetiala
• Carcasa metalica
• Conector CEE incorporat
• Conector cu 3 pini
• 16A / 250VTip/Type KO20CEE/1
pentru conectare radiala
• Carcasa metalica
• Conector CEE incorporat
• Conector cu 3 pini
• 16A / 250Vfor radial connection
• Steel housing
• Inbuild CEE-plug
• 3-pole socket
• 16A / 250V
for tangential connection
• Steel housing
• Inbuild CEE-plug
• 3- pole socket
• 16A / 250V
L: 60 – B/W: 35 – H: 55 mm
L: 65 – B/W: 55 – H: 50 mm

DELORTECH – Sisteme de incalziri si raciri industriale – Industrial heating and cooling systems
Aleea Ciocarliei nr. 3/14, 530164 Miercurea Ciuc, HR/RO +40-745-915 912, +40-755-086 086 +40-266-317 243 info@delortech.ro www.delortech.ro
1.REZISTENTE ELECTRICE INDUSTRIALE DE INCALZIRE
INDUSTRIAL HEATERS
1.17
Cutii de conectare Plug Sockets
Tip/Type KO21ST
pentru conectare radiala
• Carcasa metalica
• Conector extern cu 2- pini UFT
• 10A / 250V
Tip/Type KO22ST
Tip/Type KO30STpentru conectare axiala
• Carcasa metalica
• Conector extern cu 2- pini UFT
• 10A / 250V
pentru conectare tangentiala
• Carcasa metalica
• Conector extern cu 2- pini UFT
• 10A / 250VTip/Type KO20ST
pentru conectare radiala
• Carcasa metalica
• Conector cu 2- pini UFT incorporat
• 10A / 250Vfor radial connection
• metal-housing
• inbuilt 2-pole socket UFT
• 10A / 250V
for radial connection
• metal-housing
• external 2-pole socket UFT
• 10A / 250V
for axial connection
• metal-housing
• external 2-pole socket UFT
• 10A / 250V
for tangential connection
• metal-housing
• external 2-pole socket UFT
• 10A / 250VL: 50 – B/W: 30 – H: 85 mmL: 50 – B/W: 30 – H: 60 mm
L: 70 – B/W: 45 – H: 40 mm
L: 100 – B/W: 50 – H: 35 mm

1.REZISTENTE ELECTRICE INDUSTRIALE DE INCALZIRE
INDUSTRIAL HEATERS
1.18
DELORTECH – Sisteme de incalziri si raciri industriale – Industrial heating and cooling systems
Aleea Ciocarliei nr. 3/14, 530164 Miercurea Ciuc, HR/RO +40-745-915 912, +40-755-086 086 +40-266-317 243 info@delortech.ro www.delortech.ro
Tip/Type KA20V / KA21V
Tip/Type KA50VCutii de conectare Terminal boxes
Nr. / No. KA20V KA21V

Nr. / No. KA50V

pentru conectarea radiala
• carcasa metalica
• cu clema cablu PG9 (KA20V),
cu clema cablu PG11 (KA21V)
• bloc terminal Tip 537/2 inclus
• 16A / 250V
pentru conectarea axiala
• carcasa metalica
• cu clema cablu PG11
• bloc terminal Tip 535, 3-poli, pana la latimea 75 mm
inclus. Pentru latimi de la 90 mm se comanda separat!
• 30A / 250Vfor radial connection
• metal-housing
• with cable clamp PG9 (KA20V),
with cable clamp PG11 (KA21V)
• terminal block Typ 537/2 included
• 16A / 250V
for axial connection
• metal-housing
• with cable clamp PG11
• terminal block Typ 535, 3-pole, up to widths 75 mm
included. From widths 90 mm to be ordered separate!
• 30A / 250VLungime: 50
Length: mm
Latime: 30
Width: mm
Inaltime: 55 80
Height: mm
Lungime: 80
Length: mm
Latime: 45 / 60 / 75 / 90 / 105 / 120
Width: mm
Blocuri terminale: 3 / 3 / 3 / Variabil / Variable
Terminal blocks: buc./pcs.
Inaltime: 50
Height: mm

DELORTECH – Sisteme de incalziri si raciri industriale – Industrial heating and cooling systems
Aleea Ciocarliei nr. 3/14, 530164 Miercurea Ciuc, HR/RO +40-745-915 912, +40-755-086 086 +40-266-317 243 info@delortech.ro www.delortech.ro
1.REZISTENTE ELECTRICE INDUSTRIALE DE INCALZIRE
INDUSTRIAL HEATERS
1.19
Tip/Type KA30V / KA31V
Tip/Type KA41VCutii de conectare Terminal boxes
Nr. / No. KA30V KA31V

Nr. / No. KA41V
pentru conectarea tangentiana
• carcasa metalica
• cu clema cablu PG9 (KA30V),
cu clema cablu PG11 (KA31V)
• bloc terminal Tip 537/2 inclus (se comanda separat)
• 16A / 250V
pentru conectarea tangentiala
• carcasa metalica
• cu clema cablu PG9, PG11, PG13.5, sau PG16
• bloc terminal Tip 535 (se comanda separat)
• 30A / 250V / 380Vfor tangential connection
• metal-housing
• with cable clamp PG9 (KA30V)
with cable clamp PG11 (KA31V)
• terminal block Typ 537/2 (to be ordered separate)
• 16A / 250V
for tangential connection
• metal-housing
• with cable clamp PG9, PG11, PG13.5, or PG16
• terminal block Typ 535 (to be ordered separate)
• 30A / 250V / 380VLungime: 65 75
Length: mm
Latime: 50
Width: mm
Inaltime: 35
Height: mm
Lungime: 100
Length: mm
Latime: 50 / 75 / 100 / 150 / 200
Width: mm
Blocuri terminale: 2 / 3 / 4 / 6 / 9
Terminal blocks: buc./pcs.
Inaltime: 50
Height: mm

1.REZISTENTE ELECTRICE INDUSTRIALE DE INCALZIRE
INDUSTRIAL HEATERS
1.20
DELORTECH – Sisteme de incalziri si raciri industriale – Industrial heating and cooling systems
Aleea Ciocarliei nr. 3/14, 530164 Miercurea Ciuc, HR/RO +40-745-915 912, +40-755-086 086 +40-266-317 243 info@delortech.ro www.delortech.ro
Iesire / Exit „B“Tip/Type AK15VK
Tip/Type AK25VKCarcasa pentru conectarea cablurilor Cable connection covers
Acoperirea unui cablu direct montat
• carcasa metalica
• clema cablu
• 16A / 250V
• Iesiri: A) axial
B) tangential
Acoperirea unui cablu direct montat
• carcasa metalica
• clema cablu PG9
• 16A / 250V
• Iesiri: A) axial
B) radial
C) tangentialCovering of an directly mounted cable
• metal-housing
• Cable clamp
• 16A / 250V
• Exit: A) axial
B) tangential
Iesire / Exit „A“ Iesire / Exit „B“ Iesire / Exit „C“
Covering of an directly mounted cable
• metal-housing
• Cable clamp PG9
• 16A / 250V
• Exit: A) axial
B) radial
C) tangentialNr. / No. AK15VK

Lungime: 50
Length: mm
Latime: 25
Width: mm
Inaltime: 15
Height: mm
Nr. / No. AK25VK

Lungime: 50
Length: mm
Latime: 25
Width: mm
Inaltime: 25
Height: mm
Iesire / Exit „A“

DELORTECH – Sisteme de incalziri si raciri industriale – Industrial heating and cooling systems
Aleea Ciocarliei nr. 3/14, 530164 Miercurea Ciuc, HR/RO +40-745-915 912, +40-755-086 086 +40-266-317 243 info@delortech.ro www.delortech.ro
1.REZISTENTE ELECTRICE INDUSTRIALE DE INCALZIRE
INDUSTRIAL HEATERS
1.21
Tip/Type TB10
Tip/Type TB18Piese de fixare pentru termocuple Thermocouple – Holders
• Otel cu filet de alama
• Disponibil: M10, M12x1, M12x1,5,
M14x1,5, M16x1,5
R1/8“, R1/4“, R3/8“
• Folosit ptr.: Rezistenta tip DH200,
RH215, ZH205, ZH206,
KH210, RK220, BK225
• Otel cu filet de alama
• Disponibil: M10, M12x1, M12x1,5,
M14x1,5, M16x1,5
R1/8“, R1/4“, R3/8“
• Folosit ptr.: Rezistenta tip DH200,
RH215, ZH205, ZH206,
KH210, RK220, BK225• Steel with brass-thread
• Available: M10, M12x1, M12x1,5,
M14x1,5, M16x1,5
R1/8“, R1/4“, R3/8“
• Used for: Heater-type DH200,
RH215, ZH205, ZH206,
KH210, RK220, BK225
• Steel with brass-thread
• Available: M10, M12x1, M12x1,5,
M14x1,5, M16x1,5
R1/8“, R1/4“, R3/8“
• Used for: Heater-type DH200,
RH215, ZH205, ZH206,
KH210, RK220, BK225
28
2825
2510
18D
D

1.REZISTENTE ELECTRICE INDUSTRIALE DE INCALZIRE
INDUSTRIAL HEATERS
1.22
DELORTECH – Sisteme de incalziri si raciri industriale – Industrial heating and cooling systems
Aleea Ciocarliei nr. 3/14, 530164 Miercurea Ciuc, HR/RO +40-745-915 912, +40-755-086 086 +40-266-317 243 info@delortech.ro www.delortech.ro
Instructiuni de utilizare:
Toate rezistentele de incalzire sunt produse pentru a fi
utilizate doar pentru scopul original. Rezistentele sunt
protejate impotriva coroziunii print procesul de acoperire
galvanica a suprafetei.
Este necesar protejarea rezistentelor impotriva patrunderii
apei, uleiului si altor substante lichide. Rezistentele
cu puteri de peste 4000W trebuie sa fie elaborate pe
ceramica. Rezistentele cu gauri multiple si decupari trebuie
executate cu o placa de transfer termic din alama pentru a
compensa zonele din jurul gaurilor si a decupajelor.
Pentru conectarea electrica utilizati un cablu izolat,
rezistent la temperatura.
Montare:
Rezistentele normale pentru duze si cilindri sunt livrate
cu diametru interior extensibil. Inainte de utilizare a
rezistentelor, strangeti suruburile de strangere a benzilor.
La prima utilizare a rezistentei, pana cand acesta ajunge
la temperatura maxima, urmariti suruburile de strangere
si stangeti-le in cazul in care este necesar in timpul
procesului. Daca exista mai multe suruburi de strangere,
trebuie sa cresteti presiunea asupra suruburilor in ordine
schimbatoare.
Functionarea perfecta a rezistentelor este garantata numai
atunci cand rezistenta este montata in mod corespunzator
pe masina sau utililaj, pentru functionarea la un nivel
optim a transferului de caldura. Daca rezistentele nu sunt
montate destul de stranse, transferul de caldura nu este
optima, si in acest fel rezistentele pot fi usor distruse.
Durata de viata a rezistentelor depinde de montarea
corecta a acestoara.
Demontare:
In timpul demontarii rezistentelor este important ca
acestea sa nu se deformeze pentru posibilitatea reutilizarii
acestora. Va rugam sa folositi vazelina noastra speciala
pentru a preveni coroziunea suruburilor de strangere.Montare – Demontare
Instructiuni comandaInstallation – Removal
Ordering instructions
Instructions for use:
All our heater bands are only to be used for the original
purpose. The heaters are protected against corro- sion by
galvanical surface coating process.
It is necessary to protect the heaters against penetration
of water, oil and other liquid substances. Heaters with
more than 4000 W should be elaborated on Ceramic.
Heaters with multiple borings and cut outs should be made
with a heat transfer sheet from brass, to compensate the
bumpiness around the borings and cut outs.
For electrical connection use a sufficient heat-resistant
insulated cable, only.
Fitting:
Normal Ring- and Cylinder heater bands are up to the
exact measurement of their inner-diameter spreadable.
Before taking the heaters in use, tighten the clamping-
screws of the heater bands. While taking the heaters
in use for the first time until they reach their maximum
temperature, watch the clamping- screws and tighten them
if necesssary during this process. If there is more than
one clamping-screw, you have to increase pressure on the
screws in changing order.
The flawless function of the heaters is only guaranteed
when it is assured that the heater is properly fitted to
the machine or tool to work at an optimum level of heat
transfer. If heaters are not fitted enough the heat transfer is
interrupted, so heaters can easily be destroyed. Lifetime of
heaters is dependable on the correct mounting.
Dismantling:
While dismounting heaters it is important not to deform
them, to preserve the possibility of using them again.
Please use our special grease to prevent screws from cor-
rosion.
Calibrarea:
Pentru a da pozitia corecta a conectarii electrice si a
gaurilor, utilizati sistemul sensului acelor de ceasornic.
Partea de prindere a rezistentei trebuie sa fie pozitionata
la „ora 6“. Din aceasta pozitie trebuie sa va referiti pentru
calibrare. De exemplu: „ora 9“ ar fi echivalent cu -90 grade,
„ora 12“ ar fi echivalent cu 0 grade.
Pentru comanda, va rugam sa folositi o copie a schi –
tei noastre de comanda (vedeti pagina 1.23).Calibration:
To give the position of the electric connection and the
boring, use the clockwise system. The clamping part of the
heater should face “6 o`clock“. From this position on you
should work with the calibration. For example: “9 o`clock“
would be equivalent -90 degrees,
“12 o`clock“ would be equivalent to 0 degrees.
Please use for your ordering sketch a copy of our
service drawing (see catalogue page 1.23).1200 (0°)
600 (180°)300
(+90°)900
(-90°)

DELORTECH – Sisteme de incalziri si raciri industriale – Industrial heating and cooling systems
Aleea Ciocarliei nr. 3/14, 530164 Miercurea Ciuc, HR/RO +40-745-915 912, +40-755-086 086 +40-266-317 243 info@delortech.ro www.delortech.ro
1.REZISTENTE ELECTRICE INDUSTRIALE DE INCALZIRE
INDUSTRIAL HEATERS
1.23
Comanda Ordering
80,0 mmø100,0 mm-90°
-135°
+20,0 mmExemplu schita:Schita de comanda:
Sketch exemple:Service drawing sketch:
Specificatii comanda:
Dimensiuni / Dimension
Tensiune / Voltage
Putere / Wattage
Gauri / Bore hole
Decupaj / Cut-out
Tipul conectarii termocuplului / Thermocouple bridge
Lungime cablu / Cable length
Cutie conectare / Terminal box
Capac reflector caldura / Heat reflector coverOrder specifications:Formular comanda Order form
Firma/Company
Persoana contact/Contact
Tel.: Fax: Data/Date:
 Comanda/Order Nr./No.:  Cerere oferta/Quotation