6 Riders motorcycle multi-interphone USER MANUAL Cool multifunctional communication tool for motorcy clists !! Main Features: Communication in 6… [612326]

6 Riders motorcycle multi-interphone

USER MANUAL

Cool multifunctional communication tool for motorcy clists !!

Main Features:

Communication in 6 riders, one rider can pair with 5 riders, and can c hoose which person of the group to
talk at a time. real full duplex wireless communica tion in 6 riders by bluetooth system

Maximum talking range 1000 meters

Up to 120Km working speed

Up to 7 hours talking time

Safe auto-receiving cell phone calls

Advanced A2DP & EDR bluetooth profile

Stereo music/audio function(transmits from A2DP enabled cell phone /MP3 /GPS )

Line in audio interface, can connect with any audio source

Wind noise DSP cancellation

Water-resistance, full weather

Introduction :

––––––––––––––––– –––––––- 1 –––––––– ––––––––––––––––

We will describe this communications kit as 6 R ( Riders ) M (Multifunctional) I (Intercom)
This 6RMI can either be used for rider or for pillion.
This 6RMI can connect with three kinds of bluetooth devices: a bluetooth enabled cell phone, five 6RMI (or: four
riders and 1 pillion), an audio source which with a built in or a external audio bluetooth transmitter .

This 6RMI is a multifunctional device for motorcyclists and skiers, it can be used:
1) As a handfree bluetooth headset for cellphone ca lls ,
while out riding, the auto answer feature of the in ternal Bluetooth profile enables safe automatic han dfree
answering of the phone call automatically. It also offers a call rejecting function.
—receive the cellphone calls even you do not need to press any button, you just need to rider
your bike as normal , the process of receiving call will be automatic, after ring on of the call about 5 seconds , it
will receive the call automatically.
2) As a two way wireless full duplex interphone in 6 riders or between rider & pillion ,

Any rider could select one of 5 riders to talk at a time.

One rider can connect with 5 riders !

The maximum communication range over a high clear l ine of sight path can reach 1000m !
(this maximum range is not guaranteed) .
Typical effective range in city is approximately 700m. Please note that actual range will depend on weather
conditions, terrain, presence of obstacles i.e. a l arge vehicle , buildings non line of sight etc.
Unlike a one-way walkie talkie, which is only half duplex i.e. it can not speak and listen simultaneou sly, the 6RMI
offers real-time talking like a normal telephone.
It can connect with 5 other riders or connect with anther rider and his/her pillion.
The rider can chose which person to talk with

The working speed can be up to 120Km !

3) As a wireless bluetooth stereo music receiver an d speaker , this 6RMI has EDR and A2DP profile , with EDR
and A2DP profile it can offer another important fun ction– listening to stereo music from A2DP enable d
cellphone,MP3 or navigation audio information from GPS (this MP3 or GPS should has a built in audio blueto oth
transmitter )

4) As a bluetooth headset for receiving GPS navigat ion audio instructions ( this GPS should have a built in
bluetooth transmitter)
5) As the speakers of your MP3/GPS
If your MP3 or GPS is not Bluetooth transmitting en abled and you have not a Bluetooth AV dongle, this 6RMI also
offers another method of listening to the stereo mu sic/audio info– the simple wired method. Plug the audio source
directly into the 6RMI via the 2.5mm-3.5 mm stereo connection cable.
––––––––––––––––– –––––––– 2 –––––––– –––––––––––––––-

Components of retail box

Component Parts Number
6RMI headset main part
6RMI -001

Clip for mounting the main unit
6RMI -002

Speakers & microphone & audio plug
6RMI -003

AC &USB Charger (AC110V-220V / DC
OUTPUT 5V)
6RMI -004

2.5mm to 3.5mm audio adapter cable
6RMI -005

User manual 6RMI -006

Main BIM communications unit

––––––––––––––––– –––––––– 3 –––––––- ––––––––––––––––

Clip & hanging-hole for mounting the main 6RMI unit

\
Clip/Inserted plate/Spacer

Clip with sticker for option

Speakers/Boom Microphone/audio plug

––––––––––––––––– ––––––– 4 ––––––––– ––––––––––––––-

The AC & USB Charger

Note: Different country may has different adaptor

Before using: Charging the 6RMI
Before using this device, Please charge the 6RMI main device at least three hours.
We have provided you with the ability to charge the system via the USB port of your computer or if you are away on a
trip, you can use the supplied Multi-voltage USB po wer adapter .
The charging cable has a small USB plug for the hea dset and the large USB plug for the computer or AC adapter,
please observe to correct orientation of the USB pl ug and socket before inserting
1) Insert the USB plug of the charging cable, into the USB small jack of the headset , you can either charging by
computer or AC adapter .
2) While charging, the red LED on the headset modul e will illuminate,
when the charging is finished, the red LED will ext inguish .

Note: if you do not use the headset for a month or more , to protect the Poly-Li battery, please charge the headset
at least every month . (the fault damaged by wrong charging will be not gu aranteed).

Attaching and removing the BIM main unit on your he lmet
With the clip, You can easily mount the main unit o f the BIM on a helmet within 3 minutes.
Step:
1) find a best position on the left side of your helmet to put the clip
2) Insert the inserted plate between shell and foam of the helmet
Fix the clip on the helmet with the screws
3) hang the main unit of the 6RMI on the clip

Clip Inserted plate for clip Spacer

––––––––––––––––– ––––––– 5 ––––––––– ––––––––––––––-

Insert the plate between the shell and the foam of a helmet, fix with screws

Clip fixed on helmet 6RMI mounted on a helmet

Note: 1) If the shell of your helmet is a little thick, you could put the Spacer between the clip and the
inserted plate.
2) There are some helmets that the shell is very thic k, maybe it is difficult to fix above clip on
these helmets. In this case, you could use below cl ip with sticker

Front Back

Attaching the two speakers and the microphone
The success of the system depends on the careful po sitioning of the earspeakers directly over top of t he ear
canals. this will give the best signal to noise of the received audio..
1) To find the position of your ear canals , put yo ur helmet on firmly but don’t do it up. Slide your
thumb of one hand up between the inside of the helm et and your ear, with the fingers of that hand
on the exterior of the helmet. Feel the ear canal i n your ear with your thumb and then grip the
helmet firmly between thumb and fingers of that han d, Carefully take the helmet off BUT don’t
move your thumb from its position inside the helmet . Look at where your thumb it ! this place marks
the centre of the ear speaker ! Mount the
––––––––––––––––– ––––––– 6 ––––––––– ––––––––––––––-

Velcro pad to which the speaker will attach there, inside the helmet; Check the other side for
optimum ear speaker position.
2) Remove the protective backing of the Velcro and mount the Velcro pads in the correct positions ,
attach the two speakers on the Velcro inside your h elmet, the speaker with short wire cord for left
ear, the speaker with long wire cord for right ear.

the speaker with short wire cord the speaker with long wire for left ear
cord for right ear
Adjust the position of the microphone
Note: To reduce the external noise, you need to close the visor while riding, and please adjust the
position of the microphone to be right in front of your mouth with the foam just touching your lips , the
visor should cover the microphone effectively! (Minimizes wind noise contribution )

V X
Correct position of the microphone Wrong position of the microphone

3) Plug in the positioned headset to the communica tions module and attach it to the side of the
helmet .

Operation:
The operation is friendly and very easy.
Pairing with your Bluetooth phone for the first tim e
Note: You must have a Bluetooth enabled phone to “Pair” w ith the 6RMI
The rider and pillion pairing their headsets with t heir respective mobile phone should be at different
time,
Before using the 6RMI, please familiarize yourself with Bluetooth function of your cell phone. Read
––––––––––––––––– ––––––– 7 ––––––––– ––––––––––––––-

the instruction manual that came with the phone so you can enable its Bluetooth function.
Before you can use this 6RMI in combination with your phone , you will need to “pair” it with your cell
phone for the first time. This usually only needs t o be performed once with that individual phone
however follow the instructions supplied by the pho ne manufacturer and save the “pairing” so it will
be automatically connected when this Phone and the 6RMI come into contact again.

1) Enable the Bluetooth function on your cell phone . Short press(< 1 second) Reset key on the 6RMI.
2) You must place the 6RMI in “Pairing mode”, this is done by way of a holdin g down the
Power/Interphone key on the headset, until the red & blue LED flash alternately.
3) Begin the “searching for Bluetooth device” on th e cell phone according to the phone’s instructions
4) when the 6RMI is discovered, the cell phone will display MOTOR PHONE select this and accept the
connection
5) The cell phone will ask you to input a password to enable this connection , when prompted input
password : 0000 (four zeros)
6) Your phone will confirm that pairing has succeed ed. Note that the only light showing on the
headset is now the blue one and it will flash once every 5 seconds

Basic 6RMI Operation
Turn on Short press(< 1 second) Reset key on the BIM.
press the Power/ RIDER A key for 6 seconds or so ,
until the blue lamp illuminate, promptly release t he
Power/Interphone key, then the blue led will fl ash
every 2-5 seconds, and you can see that on the
screen of your cell phone the 6RMI will ask your
cell phone to connect with it , select ”yes” on you r phone
then they will connect each other.(for some phones,
you will have to connect the 6RMI by the phone)
Turn off press the Power/Interphone key for 6 seconds or so ,
until the blue lamp long illuminate, promptly relea se the Power/RIDER A key
then the blue led will extinguish.
Increase the volume Short press of the V+ key
Reduce the volume Short press of the V- key
Re-connect the cell phone For some reason(e.g. In some regions of high RF str ength), may the
6RMI will lose connection with the cell phone, a short press on the
Phone/Play key, they will connect each other again.

Safe Cell phone calls function
1) Receive a cell phone call automatically
When income a cell phone call, you will hear the ri ng on the cell phone and about 3-5 seconds later,
the 6RMI will receive the call automatically.
––––––––––––––––– –––––––– 8 ––––––– ––––––––––––––––

2) Terminate cell phone call
When you finish talking on the cell phone ,a short press the Phone/Play Key, will terminate the call.
3) Reject a cell phone call
When income a cell phone call, you will hear the ri ng, within 1 second immediately press the
Phone/Play key about 2 seconds, it will reject the call.
4) Make a cell phone call Dial a number on your phone as normal, ( but
don’t do this if you are on road for your safety) the sound will be
automatically heard in your headset
notice: some phones, like Panasonic x70, will
not send the audio to the headset, you may have
to press the Phone/Play key to transmit the sound
to your headset
5) Dial the last number Press the Phone/Play key 2-3 seconds, it will di al the phone number that
you dialed last time.( note : some cell phone do not support this function)

Interphone Function
Set up for bike- to- bike and rider-to-pillion inte rcom: pairing
Pairing is a one time process that is required for mutual recognition between a headset and other
bluetooth devices. once the two headsets are paired , they will retain paired whenever they are within
range .
Please note that you can speak via intercom to one buddy headset at a time.

Note:
a. when you are pairing two 6RMI s, please keep other 6RMI s must be in status of power off.
b. You could pair your 6RMI with maximum total five 6RMI s , you also could only pair with one 6RMI.
c. You could define other five 6RMI s as rider A , rider B, rider C, rider D, rider E a s you like.
But please note ! : Once you have fixed another 6RMI as rider A, the method that pairing
your 6RMI with rider A will be different to the way of pairing with rider B, C, D, E.

1) Pair your 6RMI with Rider A

a) You define another 6RMI as rider A and this ride r A define your 6RMI as rider B or rider C,D,E

Define one of other 6RMI s as rider A if you like.
To be sure that your 6RMI and rider A(another 6RMI ) are in status of power off.
Short press(< 1 second) Reset key on your 6RMI and on Rider A, power on rider A(the blue LED of
rider A will flash),please note that do not power on your 6RMI.
––––––––––––––––– ––––––– 9 ––––––––– ––––––––––––––-

simultaneously hold the POWER/RIDER A key on your 6RMI and hold the D key (if rider A define your
6RMI as rider D)on rider A until the red & blue LED of the two pairing 6RMIs flash, short press the
POWER/ RIDER A key on one of 6RMI , 5-9 seconds later the red LED of both 6RM s will extinguish
and the blue LED then will flash briefly every 2-5 seconds, thus they have finished the pairing(now yo u
could talk with another rider or your pillion).
a) You define another 6RMI as rider A and this ride r A also define your 6RMI as rider A
To be sure that your 6RMI and rider A(another 6RMI ) are in status of power off.
Short press(< 1 second) Reset key on your 6RMI and on Rider A, simultaneously hold the
POWER/RIDER A key on your 6RMI and hold the POWER/RIDER A key (if rider A define your 6RMI as
rider D)on rider A until the red & blue LED of the two pairing 6RMIs flash, short press the
POWER/RIDER A key on one of 6RM I , 5-9 seconds later the red LED of both 6RM s will extinguish
and the blue LED then will flash briefly every 2-5 seconds, thus they have finished the pairing(now yo u
could talk with another rider or your pillion).
2） Pair your 6RMI with rider B or rider C, D , E
Power on your 6RMI and Rider B （the blue LED of both 6RMI s will flash ）, simultaneously hold the B
key on your 6RMI (if you define the another 6RMI as rider B) and hold the C key (if rider B define your
6RMI as rider C) on rider B until the red & blue LE D of the two pairing BIM’s flash, short press the
POWER/ RIDER A key on one of 6RMI , 5-9 seconds later the red LED of both 6RM s will extinguish
and the blue LED then will flash briefly every 2-5 seconds, thus they have finished the pairing(now yo u
could talk with another rider or your pillion). Th e way of pairing your 6RMI with rider C, rider D, rider
E is same with above procedure.
3）） ））Chose which rider you will talk with
After you have paired with all the 6RMI s, then you will can talk with one of riders at a t ime.
STEP: after finishing the pairing procedure , confirm th at all of 6RMI s have been powered on .
Initiate an intercom call ( a short press one of in tercom key A,B,C,D,E on your 6RMI ), and you can talk
with one of rider A,B,C,D,E
For example:
A short press(< 1 second) the C Key, you will hear a beep ”du-du”, promptly release your hand, then
wait about 5 seconds you could talk with rider C. i f then you short press the E key, it will change th e
communication to talk with rider E.
4) Pair with your pillion
One of 6RMI s could be your pillion, the way of pairing and ini tiating an intercom call is same with
above 1),2),3)
Start/finish a interphone talk
Turned on your 6RMI , short press one of the intercom (A, B, C, D, E) k ey then wait about 5 seconds,
and then you will be able to communicate with anoth er rider or your pillion.
You only need a short press of same one of the inte rcom (A, B, C, D, E) key, to terminate
communications Note, to reduce power consumption, when you do not need t o talk, don't keep your 6RMI
on intercom state in a long time
If two 6RMI s were out of range, they may will lose connection. when you come whthin range, you only
need to initiate a intercom as normal.
Music function
1) Listen to stereo music from your A2DP enabled ce ll phone
Read the user manual of your cell phone carefully, if your cell phone is A2DP enabled, the 6RMI can
receive the stereo music from the cell phone.
Please note that only A2DP(stereo bluetooth) enable d cell phone can offer bluetooth music
transmitting service. You can use the Phone/Play ke y to pause/play the music from A2DP bluetooth
devices
––––––––––––––––– –––––––– 10 –––––––- ––––––––––––––––

2) Listen to music from some mono bluetooth enabled cell phone

Almost all of Nokia mono bluetooth enabled cell pho ne can offer bluetooth music transmitting service ,
but some model of other brand cell phone can not of fer this service.
We do not promise that the 6RMI will support music function for all mono bluetooth enabled cell phones .
Step: confirm that your 6RMI has paired with your cell phone; play the music on the cell phone, and
then you can enjoy the music on your 6RMI .
Note: for mono bluetooth cell phone, you can not us e the Phone/Play key to operate the music, you
only can operate the music on the phone.

3) listen to stereo music from your MP3 by Wired me thod

2.5-3.5mm audio adapter cable

With the 2.5-3.5mm audio adapter cable attached, it will can be used for connecting your 6RMI with a
major of MP3. play the MP3, you will can listen to the music via the speakers of your 6RMI .
NOTE1: when the 6RMI is working in bluetooth status, it will mute the m usic of the MP3. bluetooth is
prior. After bluetooth operation is finished, it wi ll return to play the MP3 music.
NOTE2: you only can adjust the music volume on your MP3.
4) listen to audio navigation info from your GPS by Wired method
the way is same to listening to music from a MP3.
5) listen to stereo music from MP3 via external aud io bluetooth transmitter
If you have a external audio bluetooth transmitter (it is easy to find this product in the market),ins ert
the plug of the transmitter into the jack of the MP 3.
Pair the transmitter with the 6RMI according to the instruction manual of the transmi tter.
Play the MP3 , you can listen to the music on your 6RMI.
6) listen to audio navigation info from your GPS vi a external bluetooth transmitter
The way is similar to 5) above .
7) listen to stereo music from MP3 which with a bui lt in bluetooth transmitter
please familiarize yourself with Bluetooth function of your Bluetooth enabled MP3( this MP3 must has
Bluetooth transmitting function ). read the instruction manual that came with the M P3 so you can
enable its bluetooth function. pair the MP3 with th e 6RMI according to the instruction manual of the
MP3. play the MP3, you can listen to the music on y our 6RMI.
8) listen to audio navigation info from your GPS wh ich with a built in bluetooth transmitter
The way is similar to listening to music from MP3 w hich with a built in bluetooth transmitter. (please
note that a major of bluetooth enabled GPS can not transmit audio message, their bluetooth onl y were
used for receiving voice)

––––––––––––––––– –––––––– 11 –––––––- ––––––––––––––––

Auto switch between different operations
While talking by intercom or listening to music, if it incomes a cell phone call, the voice will be sw itched
to “cell phone talking” state automatically. After the call has been hung up, the system will auto re turn
to intercom talking or music playing state.
While listening to music, short press the Power/Int erphone key, it will initiate a intercom talking. a fter
terminating the intercom talking, the system will r eturn to the music automatically.
Note: it might needs about 5 seconds to auto-return to “ intercom talking” state after the “cell phone
talking” has been hung up.

troubleshooting
1. not working
Could be a flat battery , charge the BIM 3 hours.
2. Reset
3. In some regions of high RF strength ie near high power TV transmitters ,GSM station or airport rada rs, these can
overwhelm the CPU in the BIM causing it to latch up .
Short press(< 1 second) Reset key on the 6RMI . when you turn on the 6RMI, it will work normally again.
3. No sound
Physically check to see the headset cables are ok o r the audio plug is real inserted in the jack ? swap with the other
functioning 6RMI to localize the problem . have you turned to volum e too low?
4. Whistling of the speakers
If the microphone is too closed a speaker, the spea ker will make a whistling, take the microphone away from the
speaker, reduce the volume by the Volume-key , it w ill be ok.
5.Lose connection with the cellphone or music from the cellphone
for some reason(e.g. In some regions of high RF str ength), maybe the 6RMI will
lose connection with the cellphone or music from th e cellphone,a short press on the
Phone/Play key, they will connect each other. or s ee the below 8.
6. can not connect with your mobile phone
This 6RMI can connect with a major of bluetooth enabled cell phone of main brand, but we don't undertake that it
can connect with all cell phone . Before purchasing, please confirm that if the 6RMI could connect with your cell
phone.
7. auto-power off
To cell phone call, intercom, music these different using, This 6RMI takes different Bluetooth profile. when change
between different using, it will change to the corr esponding profile.
Some cell phone maybe do not take standard bluetoot h profile, when it connect with the 6RMI, some times it may
cause turning the 6RMI off when the 6RMI are switching between three different state(call, intercom, music ).
in this case, you could turn on the 6RMI again by pressing the Power/Interphone key, and no te that only make the
6RMI working on two profile.
8. Final solution
If the solution of above clause 1.- 7.can not resolve the problem, turn your cellphone of f (sometimes you may have to
take off the battery of your cell phone and load th e battery again) and your 6RMI, then turn them on and pair them
again.

––––––––––––––––– ––––––– 12 ––––––––- –––––––––––––––

OTHER FEATURES

·Digital Signal Processor (DSP) Technology for wind noise cancellation
·Excellent performance at speeds up to the legal li mit with a full face helmet
·Easily mounts to all full face and open face helme ts
GENERAL FEATURE
·Up to 7 hours talk time when connected to your cel l phone
·UP to 7 hours time when listening to music
· 500 mAh Li Polymer battery ·Standby time: 120 hou rs
·Charging time:~ 3 hours
·Chip brand: CSR
SPECIAL FEATURE
·All weather, rain and snow resistance

––––––––––––––––– –––––––– 13 ––––––– ––––––––––––––––
Thank you for using the 6 Riders Multi-Interphone !

6 Riders motorcycle multi-interphone

––––––––––––––––– –––––––– 14 ––––––– –––––––- –––––––––